Table Of Content
Rear Cross-Traffic Collision-Avoidance Assist (RCCA) can alert the driver of a potential hazard by providing an audible warning and applying light braking. RCCA is active when the vehicle is in reverse and operating at low speeds. RCCA cannot prevent all collisions and may not provide alerts or braking in all conditions.
Forward Collision-Avoidance Assist with Pedestrian Detection (FCA-Ped)
Lane Keeping Assist is not a substitute for safe driving practices, but is a supplemental assist only. The driver is responsible for always maintaining command and control of the vehicle and must keep hands on the wheel at all times. The 2023 Hyundai Kona’s state-of-the-art Smart Cruise Control system redefines safety and convenience.
Blind-Spot Collision-Avoidance Assist (BCA)
SVM cannot completely eliminate blind spots, may not detect every object and does not warn of moving objects. Driver Attention Warning (DAW) is only a warning to inform the driver of a potential lack of driver attention or drowsiness. It does not detect and provide an alert in every situation.
Rear Occupant Alert (ROA)
It is the driver's responsibility to remain alert at all times. Since it’s a cruise control system, you can set Hyundai Smart Cruise control at a specific highway speed. It doesn’t mean the car can drive itself, but that’s less pressure that you have to apply to the accelerator.
Lane Following Assist will not work under all circumstances and will not prevent loss of control. Lane Following Assist is a supplemental assist, and does not replace the need for extreme care and attention by the driver. Many of the latest Hyundai vehicles have Smart Cruise control, including the 2021 Hyundai Sonata.
It also has a nice collection of other standard safety features, like driver drowsiness monitoring, forward automatic emergency braking, and lane-keeping assist. Higher trims can have blind-spot monitors, sensing any vehicle driving above 20 mph. Regardless of your country’s driving direction, Overtaking Acceleration Assist will operate when the conditions are satisfied. When using the function in countries with different driving directions, always check the road conditions at all times. To resume Smart Cruise ControlTo resume Smart Cruise Control after the function was canceled, operate the +, – or switch. If you push the + switch up or – switch down, vehicle speed will be set to the current speed on the cluster.
Adjust your vehicle speed by depressing the brake pedal according to the road and driving conditions ahead. When the front radar cover or sensor is covered with snow, rain, or foreign material, it can reduce the detecting performance and temporarily limit or disable Smart Cruise Control. If this occurs the ‘Smart Cruise Control message will appear for a certain period of time on the cluster.
With the help of this cutting-edge function, drivers can easily maintain a safe following distance from the car in front of them and set the required speed. The Smart 2023 Hyundai Kona adaptive cruise control is made for driving on both highways and cities. It senses traffic conditions and adjusts its speed and braking automatically to keep you in control without requiring you to continuously depress the brake pedal. Smart Cruise Control, a unique technology that elevates driving and establishes a new benchmark in the small SUV market, is available on the 2023 Hyundai Kona. It has adjustable settings, can manage stop-and-go traffic, and also improves fuel efficiency. HDA will not work under all circumstances and will not prevent loss of control.
Making your drive safer.
Blind-Spot Collision-Avoidance Assist (BCA) assists the driver by warning of other cars in the blind spot region. It senses the rear side territory of the vehicle when it is traveling over 20 mph. There are limitations to the function, range, detection and clarity of the system. It will not detect all vehicles or objects in the blind spot. Its operation depends on the size, distance, angle and relative speed difference between your car and other cars. BCA is a supplemental system and the driver must still be attentive and exercise caution when driving.
Downhill Braking Control (DBC) is designed to help the driver maintain vehicle speed on steep, downhill descents and is not a substitute for safe driving. Vehicle speed, grade and surface conditions and other factors can affect the system’s capability. See Owner’s Manual for additional limitations and details. If you’re driving during a blizzard, you can’t really keep your grille clean as you’re driving. Adaptive cruise control is essential in severe weather conditions, especially when drivers around you might struggle to see clearly. Hyundai Smart Control is also usually included in its cars’ standard features, whereas other automakers might make you pay extra.
You can turn off the Smart Cruise Control by pressing the cancel button on the steering wheel or by tapping the brake pedal. Yes, you can typically adjust the following distance using the controls on the steering wheel or through the vehicle’s infotainment system. Basic functionYou can see the status of the Smart Cruise Control operation in the Driving Assist mode on the cluster. Smart Cruise Control will be displayed as below depending on the status of the function.
How Well Do the 2020 Hyundai Palisade’s Safety and Driver-Assist Features Work? - Cars.com
How Well Do the 2020 Hyundai Palisade’s Safety and Driver-Assist Features Work?.
Posted: Thu, 23 Jul 2020 07:00:00 GMT [source]
If you press the switch, vehicle speed will resume to the preset speed. To decrease speedPush the – switch down and release it immediately. The cruising speed will decrease by 1 mph (1 km/h) each time the switch is operated in this manner. Push the – switch down and hold it while monitoring the set speed on the cluster. The cruising speed will decrease by 5 mph (10 km/h) each time the switch is operated in this manner. When the vehicle is parked, Safe Exit Warning (SEW) can alert the driver when a vehicle is approaching from behind.
CAUTIONSmart Cruise Control may not properly operate in an area (for example, open terrain), where there is nothing to detect after turning ON the engine. Smart Cruise Control Operation Operating conditionsSmart Cruise Control will operate when the following conditions are satisfied. Convenience that helps make commutes and long drives more bearable by safely taking over the tedious parts of driving when you want them to. A whole new car buying experience designed to save you time and help make buying your new car as enjoyable as driving it.
When the vehicle is parked and the engine has been turned off, the Advanced Rear Occupant Alert (AROA) can help to alert the driver if it detects movement from a child or pet. Upon exiting and locking the vehicle, the AROA may provide visual, audible, and/or Bluelink alerts if the interior overhead sensor detects movement. Bluelink notification requires a Bluelink-equipped vehicle with an active Bluelink account. Lane Following Assist (LFA) helps keep the vehicle centered in its lane only when the lane markings are clearly visible on the road.
The Smart Cruise Control’s radars also won’t be limited by hazardous weather conditions, such as heavy rain or fog. Rosen Hyundai also boasts that Smart Cruise Control is highly reliable, even inspiring some new lunar excursion technology. Yes, you can typically customize settings like the following distance, speed, and sensitivity through the vehicle’s settings menu. Yes, you can override the system at any time by using the brake pedal or accelerator or by turning off the cruise control.
No comments:
Post a Comment